Comparison table for the conversion of inches and millimeters of water outlet pipe diameter in sewage pump

Comparison table for the conversion of inches and millimeters of water outlet pipe diameter in sewage pump

The diameter of the sewage pump mainly includes the following sizes DN25/DN30/DN40/DN50/DN76/DN80/DN100/DN125/DN150/DN200, etc., which can reach the maximum DN600, but the most commonly used are conventional sizes such as DN50/DN65/DN80/DN100. So what is the conversion unit of inches and millimeters of the sewage pump water outlet pipe? The details are as follows:

1 inch = 25.4 mm = 8 inches ZX

1/2 is four points (4 English points) DN15

3/4 is six points (6 English points) DN20

2 General Manager = DN8 4 General Manager = DN15

6 in charge of DN20

1′=DN25

1.2′=DN32

1.5′=DN40

2′=DN50

2.5′=DN65

3′=DN80

4′=DN100

5′=DN125

6′=DN150

8′=DN200

10′=DN250

12′=DN300

GB/T50106-2001

The above is the main comparison table. If you have any questions, please contact us Dingfei Pump Industry