Summary of advantages of pneumatic diaphragm pumps

(1) The diaphragm pump has no complicated control system, no cables, fuses, etc.

(2) The diaphragm pump is small in size, light in weight and easy to move.

(3) The diaphragm pump does not require lubrication, so it is easy to repair and will not pollute the working environment due to dripping.

(4) The diaphragm pump can always maintain high efficiency and will not decrease due to wear.

(5) The diaphragm pump uses 100% of its energy. When the outlet is closed, the pump automatically stops and the equipment moves, wears, overloads, and heats up.

(6) The diaphragm pump has no dynamic seal and is easy to repair to avoid leakage. There are no dead spots when working.

(7) Wilden diaphragm pump will not overheat: compressed air is used as power, and it is a process of expansion and heat absorption when exhausting. The temperature 

of the pneumatic pump drops when it is operating, and no harmful gases are discharged.

(8) The diaphragm pump will not generate sparks: the pneumatic diaphragm pump does not require electricity for power, and it avoids static sparks after being grounded.

(9) The diaphragm pump can pass liquid containing particles: because it operates in a positive displacement manner and the inlet is a ball valve, it is not easily blocked.

(10) The shear force of the diaphragm pump on the material is extremely low: it is sucked in and spit out during operation, so the agitation of the material is minimal, and 

it is suitable for transporting unstable substances.

(11) The flow rate of the diaphragm pump can be adjusted. A throttle valve can be installed at the material outlet to adjust the flow rate.

(12) The diaphragm pump has the function of self-priming.

(13) The diaphragm pump can work empty without risk.

(14) The diaphragm pump can operate submersively.

(15) Diaphragm pumps can transport a wide range of fluids, from low viscosity to high viscosity, from corrosive to viscous.